Model | A(mm) | B(mm) | C(mm) | D(mm) | E(mm) |
M30/B350B | N(3.3+X) | 1150 | 596 | 2882 | 1842 |
The bottom of the center to ground level (mm) | 470 |
MAX.LC (mm) | 4800 |
Connection (mm) | 350 |
Maximum flow (m3/h) | 997 |
Design pressure (MPa) | 1.0/1.6 |
Max. number of plates | 700 |
Plate Material | Suitable fluid |
Stainless steel (SUS304, 316L etc.) | Pure water, River water, Edible salt water, Mineral oil |
Titanium, ti-pd | Brine, sea water, Salt water |
SMO254 | Dilute sulphuric acid, Salt water solution, Inorganic aqueous solution |
Ni | High temperature, High concentration of caustic soda |
Hastelloy (C276, C22) | Concentrated sulfuric acid, Hydrochloric acid, Phosphoric acid |
Main body gasket | Operating temperature (ºC) | Suitable fluid |
NBR | -15 ~ +135 | Water, Sea water, Mineral Salt, Brine |
EPDM | -25 ~ +180 | Hot water, Vapour, Acid, Base |
F26 | -25 ~ +230 | Acid, Base, Fluid |
FTP | 0 ~ +160 | Concentrated acid, Base, High temperature oil, Vapour |
Plate type | Application |
Lower runner (B) | Temperature drop of heat-transfer medium too large, Temperature difference of logarithm too small |
High runner (H) | Request of viscosity, Fibroid, Pressure drop too small |
Model | A (mm) | B(mm) | C (mm) | D (mm) | E (mm) | MAX.LC (mm) | Connection (mm) | Exchange area (m2) | Max. number of plates | Max. volume flow (m3/h) | Design pressure |
M3 / B30B | N(2.5+X) | 180 | 60 | 480 | 357 | 500 | 32 | 0.032 | 95 | 18 | 1.6 |
TS6M / S60H | N(4+X) | 400 | 203 | 704 | 380 | 1200 | 65 | 0.086 | 147 | 50 | 1.6 |
M6 / B60B | N(2.0+X) | 320 | 140 | 920 | 640 | 1200 | 50 | 0.15 | 250 | 36 | 1.6 |
M6M / B60H | N(3.0+X) | 320 | 140 | 920 | 640 | 1200 | 50 | 0.15 | 203 | 36 | 1.6 |
K60B | N(2.0+X) | 320 | 140 | 950 | 689 | 1200 | 50 | 0.12 | 250 | 36 | 1.6 |
K60H | N(3.0+X) | 320 | 140 | 950 | 689 | 1200 | 50 | 0.12 | 203 | 36 | 1.6 |
M10B / B100B | N(2.55+X) | 470 | 225 | 1069 | 719 | 1600 | 100 | 0.25 | 278 | 140 | 1.0/1.6/2.5 |
M10M / B100H | N(3.95+X) | 470 | 225 | 1069 | 719 | 1600 | 100 | 0.25 | 180 | 140 | 1.0/1.6/2.5 |
K100B | N(2.55+X) | 470 | 225 | 1099 | 763 | 1600 | 100 | 0.3 | 278 | 140 | 1.0/1.6/2.5 |
K100H | N(3.95+X) | 470 | 225 | 1099 | 763 | 1600 | 100 | 0.3 | 180 | 140 | 1.0/1.6/2.5 |
TS20M / S200H | N(4+X) | 800 | 363 | 1405 | 698 | 3000 | 200 | 0.3 | 400 | 600 | 1.6 |
TL10 / L100B | N(2+X) | 480 | 225 | 1888 | 1338 | 3000 | 100 | 0.5 | 400 | 140 | 1.0 |
K150H | N(3.95+X) | 610 | 298 | 1616 | 1095 | 3000 | 150 | 0.5 | 600 | 360 | 1.0/1.6/2.5 |
M15B / B150B | N(2.5+X) | 610 | 298 | 1815 | 1294 | 3000 | 150 | 0.65 | 600 | 360 | 1.0/1.6/2.5 |
M15M / B150H | N(3.95+X) | 610 | 298 | 1815 | 1294 | 3000 | 150 | 0.65 | 600 | 360 | 1.0/1.6/2.5 |
M20M / T20M / B200H | N(4+X) | 780 | 353 | 2260 | 1478 | 3000 | 200 | 0.85 | 400 | 600 | 1.0/1.6 |
MX20B / MX25B / B250B | N(2.5+X) | 920 | 439 | 2895 | 1939 | 3000 | 250 | 1.5 | 500 | 750 | 1.0/1.6/2.5 |
M30 / B350B | N(3.3+X) | 1150 | 596 | 2882 | 1842 | 4800 | 350 | 1.85 | 700 | 997 | 1.0/1.6 |
Our workshop: